Publisher Info

Title:Science of Sintering
Web address:http://www.iiss.sanu.ac.rs/
ISSN:0350-820X
eISSN:1820-7413
First published:1974
Frequency:three times a year
On-line first:Da
Subject:materials and chemical technologies; other engineering sciences
Description:Science of Sintering the journal of the International Institute for the Science of Sintering, is a unique journal in the field of science and technology of sintering. Science of Sintering publishes papers on all aspects of theoretical and experimental studies, which can contribute to the better understanding of the behaviour of powders and similar materials during consolidation processes. Emphasis is laid on those aspects of the science of materials that are concerned with the thermodynamics, kinetics and mechanism of sintering and related processes. In accordance with the significance of disperse materials for the sintering technology, papers dealing with the question of ultradisperse powders, tribochemical activation and catalysis are also published. Types of contribution: Original research papers, Review articles, Letters to Editor, Book reviews.
Publisher:International Institute for the Science of Sintering, Beograd
Publisher address:Kneza Miloša 35/IV, 11000 Beograd, Serbia
Impact factor:0.278 (2012)
0.274 (2011)
0.403 (2010)
0.486 (2009)
0.412 (2008)
0.481 (2007)
Chief editor:Academician prof. M. M. Ristic, Serbian Academy of Sciences and Arts, Belgrade, Serbia, Momcilo.Ristic@sanu.ac.rs
Editorial board:prof. V. Pavlovic, Institute of Technical Sciences, SASA, Belgrade, Serbia
dr M. V. Nikolic, International Institute for the Science of Sintering ITN SANU, Belgrade, Serbia
prof. F. Aldinger, Max-Planck-Institut fuer Metallforshung und Institut fuer Nichtmetallische Anorganische Materialien der Universtaet Stuttgart Stuttgart, Germany
prof. R. A. Andrievskii, Institute of Problems of Chemical Physics Russian Academy of Sciences, Moscow, Russia
dr J. M. Chaix, Laboratorie de Thermodynamique et de Physico-Chimie Metallurgiques Saint Martin d’Heres, France
prof V. Mitic, Institute of Technical Sciences, SASA, Belgrade, Serbia
Academician prof. P. M. Nikolic, Serbian Academy of Sciences and Arts, Belgrade, Serbia
prof. Z. Nikolic, Faculty of Electronic Engineering Dept. of Microelectronics University of Nis, Serbia
prof. Z. Popovic, Institute of Physics, Belgrade, Serbia
Academician V. V. Skorokhod, Institute for Problems of Materials Science of the Ukrainian Academy of Science, Kiev, Ukraine
dr D. Suvorov, Institute “Jožef Stefan”, Ljubljana, Slovenia
prof. D. Uskokovic, Institute of Technical Sciences Serbian Academy of Sciences and Arts, Belgrade, Serbia
dr W. Wlosinski, Warswa University of Technology, Warszawa, Poland
dr J. E. Blendell, School of Materials Engineering Purdue University West Lafayette, USA
prof. R. M. German, College of Engineering San Diego State University, San Diego, USA
prof. Yu.Gogotsi, Drexel University dept. of Materials Engineering Chestnut, St. Philadelphia, USA
dr M. Kakazey, The Autonomous University of the State of Morelos, Cuernavaca, Mexico
prof. E. A. Olevsky, Dept. of Mechanical Eng. College Of Engineering San Diego State University, Sand Diego, USA
dr M. Singh, Ohio Aerospace Institute NASA Glenn Research Center, Clevelenad, USA
prof. J. A. Varela, Instituto de Quimica - UNESP Araraquara, Sao Paolo, Brasil
prof. M. P. Dariel, Department of Materials Engineering Ben-Gurion University Beer-Sheva, Israel
prof. Li Nan, Wuhan University of Science and Technology Department of Materials Science and Engineering Quinshan Wuhan Hubei, P. R. China
prof. S. - J. L. Kang, Dept. Materials Sci. and Eng. Korea Advanced Institute of Science and Technology Daejeon, Republic of Korea
prof. G. S. Upadhyaya, Department of Materials & Metallurgical Engineering Indian Institute of Technology, Kanpur, India
prof. F. Wakai, Secure Materials Center Materials and Structures Laboratory Tokyo Institute of Technology, Japan
prof. R. Watanabe, Tohoku Polytechnic College Aomori Kitsuneno Iizume Aomori, Japan
dr S. M. Radic Ristic, Institute of Technical Sciences Serbian Academy of Sciences and Arts, Belgrade, Serbia
dr Nina Obradovic, Institute of Technical Sciences, SASA, Belgrade, Serbia
prof. G. Stanišic, Center for Solid State Physics and New Materials Institute of Physics, Belgrade, Serbia
Mirjana Kosanovic, Institute of Technical Sciences Serbian Academy of Sciences and Arts, Belgrade, Serbia